Charge the battery
Your battery has been partially charged
at the factory. If the device indicates a
low charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger plug to the
device.
If you are using a USB charger,
connect the charger plug to the USB
connector.
Get started 13
© 2010 Nokia. All rights reserved.
3 When the device indicates a full
charge, disconnect the charger from
the device, then from the wall
outlet.
You do not need to charge the battery
for a specific length of time, and you can
use the device while it is charging. If the
battery is completely discharged, it may
take several minutes before the
charging indicator appears on the
display or before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is
slower than charging with the charger.
Charging with the USB data cable may
not work if you use a USB hub. USB hubs
may be incompatible for charging a USB
device.
When the USB data cable is connected,
you can transfer data at the same time
as charging.
1 Connect a compatible USB device to
your device using a compatible USB
data cable.
Depending on the type of the device
that is used for charging, it may take
a while for charging to start.
2 If the device is switched on, select
from the available USB modes.